Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | WADE-7220-R2314, WADE-8173-J6412, WADE-8212-Q470E, WADE-8017, WADE-8171,WADE-8213-Q670E, WADE-8211-Q |
| Power Supply | 12V & 19~24V DC input or ATX power input |
| Storage Devices | 1x SATA III ports |
| Graphics Card Type | Integrated |
| USB Ports | - 4x USB 3.0 on rear I/O - 4x USB 2.0 on pin header (2.54mm pitch) |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Form Factor | Carrier Board, Compliant with SMARC V1.0 |
| Edge IO | 1x DC-in Jack (12V),1x RJ45 GbE LAN,1x Mic+Headphone,2x USB 2.0 host,1x USB OTG,1x HDMI |
| Internal Headers Connectors | 2x CAN bus 2.0B,1x 18/24-bit single CH LVDS,1x 18/24-bit TTL box header,1x LCD DDC (IC) |
| Jumpers Switch and Button | 1x Boot media select switch (SD/eMMC),1x Reset button,1x Power button,1x GPI button,1x RS232/422 |
| Dimensions | 170mm x 170mm |
| Power Input | 19V DC-in |
| Operating Temperature | -40 to +85 C |
Product Details:
| Voltage | 5.0 V +- 5% |
| Dimensions | 54.0 x 39.8 x 4.0 mm |
| Power Consumption | Active mode: 530 mA or Idle mode: 100 mA |
| Country of Origin | Made in India |
| Memory capacity | 120GB to 960GB |
| Interface | SATA 3.2 or 6Gb/s |
| Connector | M.2 B and M key |
| Form Factor | JEDEC MO-297 |
| NAND Flash type | 3D TLC |
| Sequential Read Performance (MB/sec) | Up to 560 |
| Sequential Write Performance (MB/sec) | Up to 520 |
| ECC Engine | Low-Density Parity-Check (LDPC) Code |
| IOPS (4K Random Write) | 85K |
| Extended Operating Temperature ( DegreeC ) | -40 to + 85 |
| Storage Temperature ( DegreeC ) | -40 to + 100 |
| Thermal Sensor | Yes |
| Shock | Operation: 50G/11ms Non-operation: 1500G/0.5ms |
| Vibration | Operation: 7.69 Grms, 20~2000 Hz/random Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine |
| Technology | AES 256-bit Encryption ATA Secure Erase Conformal Coating CoreAnalyzer2 DataDefender(TM) |
| MTBF | >3,000,000 |
| External DRAM | No |