Modules

Product Details:

COM-HPC is a high-performance expansion card for servers. It uses the same concept as COM Express but increases the connectors from 440 pins to 800 pins to support more expansions and improves the speed of the I/O interface with PCIe Gen 4 or Gen 5 (32GT/s), USB 3.2 Gen 2×2 (20Gbps) or USB 4 (40Gbps), and 25G KR signals. COM-HPC has two module types: Server and Client.

• COM-HPC Server: Provide superior computing performance and enhanced network throughput.
• COM-HPC Client: Support comprehensive high-speed I/O interface. 

COM-HPC is the perfect choice for server applications. It provides up to 65 PCIe and 8 KR Ethernet lanes, making it ideal for connecting servers and other devices. And it also features a CPU with a TDP of up to 150W, so you can get the performance you need.

Additional Information:

• Production Capacity: 500
• Delivery Time: 10 - 12 DAYS AFTER PO AND PAYMENT

Product Details:

• Configurable WirelessHART slave module with Modbus Master
• Publish variables and status indicators from the Modbus device
• over WirelessHART network
• Modbus RTU communication over RS 485
• 24 V supply voltage
• Variable and status simulation for better testability
• LEDs for power, join status, bursting and Modbus traffic
• Based on Fint’s embedded T810 WirelessHART converter
• Connector for Handheld Configurator

Product Details:

◆the module supports 8 channels digital input, supports sink input，and the input voltage is 24VDC and the input high level is valid. It could support PNP sensor.

◆the module could collect digital output signal of field equipment (dry contact or active output).

◆the module could be accessed to 2-wire or 3-wire digital sensor.

◆the internal bus and field input of the module use opto-isolator.

◆the module supports the input signal holding function, and the holding time can be set.

◆the module carries 8 digigtal input channels with LED indicator on each channel.

◆supports counting function, by adding counting sub-module.

◆each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.

◆the module could be set the digital signal input filtering time and the byte transmission order of the counter.

◆each channel of the module could be set the counting mode and counting direction independently.

Additional Information:

• Production Capacity: 1000

Product Details:

◆ the module supports 8 channels digital input, and the input low level is valid. It could support NPN sensor.

◆ the module could collect digital output signal of field equipment (dry contact or active output).

◆ the module could be accessed to 2-wire or 3-wire digital sensor.

◆ the internal bus and field input of the module use opto-isolator.

◆ the module supports the input signal holding function, and the holding time can be set.

◆ the module carries 8 digigtal input channels with LED indicator on each channel.

◆ supports counting function after adding counting sub-module.

◆ each input channel of the module supports a 32-bit counter with the counting frequency <200Hz.

◆ the module could be set the digital signal input filtering time and the byte transmission order of the counter.

◆ each channel of the module could be set the counting mode and counting direction independently.

Additional Information:

• Production Capacity: 1000

Product Details:

STS PNT32DM 16DI+16DO Profinet Remote IO Modules, Modbus IO Modules STS is specialized in the research and development, production and sales of automation components,We provide the multi-protocol ( Profinet, Ethernet/IP,Device Net, Ether Cat) remote IO module which can meet various needs of different industries.

Additional Information:

• Item Code: ST16IP20
• Production Capacity: 500
• Delivery Time: 10 - 15 DAYS AFTER PO AND PAYMENT

Product Details:

The AO810/AO810V2 Analog OutputModule has 8 unipolar analog output channels. To supervise the communication to the D/Aconverters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision,which is reportedwhen supplyvoltage to output circuitryis to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output currentis less than the output setvalue and the output setvalue is greater than 1 mA.

Additional Information:

• Item Code: AO810V2
• Production Capacity: 100
• Delivery Time: 15 TO 18 DAYS AFTER PO AND PAYMENT

Product Details:

Relays are devices making or breaking electric circuits by their output section driven by operational signal, which is triggered by electric input signal controlled by switching devices.

Additional Information:

• Production Capacity: 500
• Delivery Time: 10 - 12 days After PO and Payment

Product Details:

Quectel EC20 R2.1 Mini PCIe is an LTE category 4 module adopting standard PCI Express® MiniCard form factor (Mini PCIe). Adopting the 3GPP Rel.11 LTE technology, it is optimized specially for M2M and IoT applications, and delivers 150Mbps downlink and 50Mbps uplink data rates. Designed in the compact and unified form factor, EC20 R2.1 Mini PCIe is compatible with Quectel UMTS/HSPA+ UC20 Mini PCIe module, multi-mode LTE Cat 3 EC20 Mini PCIe and Cat 4 EC20 R2.0 Mini PCIe/EG25-G Mini PCIe module, which allows for flexible migration among them in design and manufacturing. Meanwhile, it is backward-compatible with existing EDGE and GSM/GPRS networks, ensuring that it can be connected even in remote areas devoid of 4G or 3G coverage. EC20 R2.1 Mini PCIe supports multiple-input multiple-output (MIMO) technology. The use of multiple antennas at the receiver end at the same time and on the same frequency band greatly minimizes errors and optimizes the data speed. The module also combines high-speed wireless connectivity with embedded multi-constellation high-sensitivity GNSS (GPS, GLONASS, BeiDou, Galileo, QZSS) receiver for positioning. A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB drivers for Windows 7/8/8.1/10, Linux, Android/eCall*) extend the applicability of the module to a wide range of M2M applications such as CPE, industrial router, industrial PDA, rugged tablet PC, video surveillance and digital signage. 

KEY BENIFITS:

LTE category 4 module optimized for M2M and IoT applications.
Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage.
Multi-constellation GNSS receiver available for applications.
requiring fast and accurate fixes in any environment.
Feature refinements: supports DFOTA, eCall* and DTMF.
MIMO technology meets demands for data rate and link reliability in modem wireless communication systems.
ChipsetEC20

ApplicationWireless & IoTMODEL NO: EC20 CE FILG 

Additional Information:

• Production Capacity: 500
• Delivery Time: 2weeks after PO and Payment

Product Details:

The module supports the mounting of 32 IO modules, and the CPU and IO modules are designed separately, which can be freely combined according to the needs of the site, and can achieve lower cost requirements in the case of a large number of points. The module has 3*RJ45/1*RS485/1*CAN interfaces, supports Modbus RTU, Modbus TCP, EtherCAT, CANOpen protocol access, easy configuration, fast debugging.

-30°C~70°C wide temperature of the whole machine, it can cope with various industrial sites, EMC performance to meet IEC61131-2, IEC61000-4 standards. The expansion module is mainly divided into 6 categories, digital input module, digital output module, analog input module, analog output module, special module and hybrid IO module.

Additional Information:

• Production Capacity: 1000