ABB PRODUCTS

Product Details:

The RPBA-01 PROFIBUS-DP Adapter module is an optional device for ABB drives which enables the connection of the drive to a PROFIBUS network. The drive is considered as a slave on the PROFIBUS network. Through the RPBA-01 PROFIBUS-DP Adapter module, it is possible to: •give control commands to the drive (Start, Stop, Run enable, etc.) •feed a motor speed or torque reference to the drive •give a process actual value or a process reference to the PID controller of the drive •read status information and actual values from the drive •change drive parameter values •reset a drive fault. The PROFIBUS commands and services supported by the RPBA-01 PROFIBUS-DP Adapter module are discussed in chapter Communication. Please refer to the user documentation of the drive as to which commands are supported by the drive. The adapter module is mounted into an option slot on the motor control board of the drive. See the Hardware Manual of the drive for module placement options. The type definition (GSD) file required for configuration  ABB_0812.GSD.

Additional Information:

• Production Capacity: 500
• Delivery Time: 10 - 12 DAYS AFTER PO AND PAYMENT

Product Details:

A30-30-10 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting.

Additional Information:

• Item Code: A30-30-10
• Delivery Time: 15 to 18 working days

Product Details:

These flexible plug-in adapters provide fast and simple universal connectivity to all major controllers. Universal connectivity means ABB Low Voltage Drives connect to virtually all controller brands and communication networks, allowing users to choose the best network to meet their needs.

End User Benefits • Decrease in mechanical and electrical installation cost • Decrease in down time • Increase in productivity • Diminished start-up cost • Lower maintenance and diagnostic cost

Additional Information:

• Item Code: RMBA-01
• Production Capacity: 100
• Delivery Time: 15 TO 18 DAYS AFTER PO AND PAYMENT

Product Details:

GENERAL INFORMATION:

Extended Product Type : PM554-TP-ETH

ABB Type Designation : PM554-TP-ETH

Catalog Description : PM554-TP-ETH:AC500,Prog.Logic Controller

Long Description : PM554-TP-ETH:AC500,Prog.Logic Controller ,128kB,8DI/6DO-T,ETH,24VDC,1xRS485,2xOption Slot

Additional Information:

• Item Code: PM554-TP-ETH
• Production Capacity: 500
• Delivery Time: 15 TO 18 WORKING DAYS

Product Details:

The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface. The base plate of the PM862 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool. The controller supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interfaces and S800 I/O). Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.

Additional Information:

• Item Code: PM862K02
• Delivery Time: 15 TO 18 WORKING DAYS